Compare Models: 2024 Exmark Lazer Z X-Series 60 in. Kohler EFI 38 hp with RED Tech vs 2024 Exmark Lazer Z X-Series 60 in. Kohler EFI 38 hp with RED Tech at Otsego Outdoor Power

2024 Exmark Lazer Z X-Series 60 in. Kohler EFI 38 hp with RED Tech in Gaylord, Michigan — 2024 Exmark Lazer Z X-Series 60 in. Kohler EFI 38 hp with RED Tech

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2024

Model

Lazer Z X-Series 60 in. Kohler EFI 38 hp with RED Tech

Model Code

LZX980EKC606R1

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Seat

Deluxe, two-tone, bolstered suspension seat with elastomeric vibration control material. Mounted on innovative seat isolation system that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up

Rollover Protection (ROPS)

2-post foldable ROPS standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Drive System

Hydro

Drive Type

Drive description - Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7 qt. integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 18 ci otors

Transmission

Hydrostatic

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 11.5 mph (16.8 km/h)

Travel Speed Reverse

0 - 7.0 mph (11.3 km/h)

Wheels/Tires

Caster forks - 0.50 in. thick caster yoke arms

Drive Tires

24 x 12.0-12, 4-ply Turf Master®

Drive wheel release - Allows unit movement without engine running

24 x 12.0-12, 4-ply Turf Master®

Drive wheel release - Allows unit movement without engine running

Steering Tires

Front Caster Tires - 13 x 6.5-6, smooth-tread, semi-pneumatic

Parking Brake

Lever-actuated disc brake

Electrical

Battery

12 V with 25 A alternator

Instrumentation

Fuel indicator - Electronic sender

Onboard intelligence - RED Technology

Fuel indicator - Electronic sender

Onboard intelligence - RED Technology

Hour Meter

Engine

Engine Make

Kohler

Engine Model

ECV980, Command Pro™ EFI

Horsepower

38 hp @ 3,650 rpm

Displacement

999 cc

Fuel System

Electronic throttle body

Air Cleaner

Air filter - Heavy-duty canister air filtration system

Starter

Electric

Fuel Type

Gas

Fuel Capacity

12 gal. (45.4 l) single fuel tank with single fill location

Measurements

Length

83.1 in. (211.1 cm)

Width

72.8 in. (184.9 cm)

Height

70.5 in. (179.1 cm)

Weight

Curb - 1, 256 lb.

Cutting Width

60 in.

Mowing Height Range

1.0 - 5.5 in. (2.5- 11.8 cm) in 0.25 in. (0.64 cm) increments

Mowing Height Adjustments

Adjustable from operator’s seat

Operational

Steering

Control - Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.

Deck Construction

7 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. high strength alloy side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Rear Discharge Deck

7 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. high strength alloy side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Rear Discharge Deck

Deck Lift

Electric over hydraulic push button control

Discharge

Side discharge standard with the option to bag or mulch

Spindles

Blade - No maintenance, sealed and non-greasable spindles, 7.75 in. diameter cutter housing with 1.18 in. (30 mm) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver

Blades

3 at 20.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop electromagnetic 250 ft. lb. clutch with spot brake

Other

Includes

Cup holder

Warranty

Commercial / Consumer - 5 year limited or 1,500 hour limited (with no hour limit the first 2 years)

Features

PATENTED RED TECHNOLOGY: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
ULTRACUT SERIES 6 DECK: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. and, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)
A LEVEL OF COMFORT: Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
PRODUCTIVITY: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.
OIL GUARD SYSTEM: The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.
ADAPT YOUR CUT: Adjust deck rake quickly and easily to optimize cut quality and cutting performance for a variety of turf types and conditions. Adapt is especially useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.

Features

PATENTED RED TECHNOLOGY: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
ULTRACUT SERIES 6 DECK: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. and, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)
A LEVEL OF COMFORT: Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
PRODUCTIVITY: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.
OIL GUARD SYSTEM: The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.
ADAPT YOUR CUT: Adjust deck rake quickly and easily to optimize cut quality and cutting performance for a variety of turf types and conditions. Adapt is especially useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.