Compare Models: 2024 Exmark Lazer Z E-Series 72 in. Kawasaki FX801V 25.5 hp and Suspension Platform vs 2024 Exmark Lazer Z E-Series 72 in. Kawasaki FX801V 25.5 hp and Suspension Platform at Otsego Outdoor Power

2024 Exmark Lazer Z E-Series 72 in. Kawasaki FX801V 25.5 hp and Suspension Platform in Gaylord, Michigan — 2024 Exmark Lazer Z E-Series 72 in. Kawasaki FX801V 25.5 hp and Suspension Platform

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2024

Model

Lazer Z E-Series 72 in. Kawasaki FX801V 25.5 hp and Suspension Platform

Model Code

LZE801GKA724C1

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster Forks - 0.50 in. thick caster yoke arms

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster Forks - 0.50 in. thick caster yoke arms

Seat

Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

Rollover Protection (ROPS)

2-post foldable ROPS standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Drive System

Hydro

Drive Type

Drive description - Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7 qt. integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 ci. motors

Transmission/Drive

Hydro-Drive

Transmission

Hydrostatic

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 10.0 mph (16 km/h)

Travel Speed Reverse

0 - 6.0 mph (9.7 km/h)

Drive Tires

24 x 12-12, 4 ply Super Turf®

Drive wheel release - Allows unit movement without engine running

24 x 12-12, 4 ply Super Turf®

Drive wheel release - Allows unit movement without engine running

Steering Tires

Front caster tires - 13 x 6.50-6, smooth-tread, semi-pneumatic

Parking Brake

Lever-actuated disc brake

Electrical

Battery

12V with 15A alternator

Instrumentation

Fuel indicator - Electronic sender

Hour Meter

Engine

Engine Make

Kawasaki

Engine Model

FX801V, V-Twin Series

Gross Horsepower

25.5 hp @ 3,750 rpm

Displacement

852 cc

Air Cleaner

Air filter - Heavy-duty canister air filtration system

Fuel Type

Gas carbureted

Fuel Capacity

8 gal. (30.3 l) single fuel tank with single fill location

Measurements

Length

86.1 in. (218.7 cm)

Width

84.9 in. (215.6 cm)

Height

70.5 in. (179.1 cm)

Weight

Curb - 1,387 lb.

Mowing Width

72 in.

Mowing Height Range

1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments

Mowing Height Adjustments

Adjustable from operator’s seat

Operational

Steering

Control - Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.

Deck Construction

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

Deck Lift

Standard, foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position

Discharge

Side discharge standard, with molded discharge chute and option to bag or mulch

Spindles

Blade - No maintenance, sealed and non-greasable spindles, 7.75 in. diameter cutter housing with 0.98 in. (25 mm) diameter spindle shaft and splined blade driver

Blades

3 at 24.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop Electromagnetic 200 ft. lb. clutch with spot brake

Other

Includes

Cup holder

Warranty

Commercial / Consumer - 5 year limited or 1,250-hour (with no hour limit the first 2 years)

Features

HYDRO DRIVE, SIMPLIFIED: Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
UNIBODY FRAME: Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
LESS TIME AT THE PUMP: Gas-powered E-Series models have a single 8-gallon tank with one fill location.
ON-BOARD DIAGNOSTICS: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
FEWER GREASE POINTS: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
ULTRACUT SERIES 4 DECK: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
REAR DISCHARGE DECK: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.

Features

HYDRO DRIVE, SIMPLIFIED: Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
UNIBODY FRAME: Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
LESS TIME AT THE PUMP: Gas-powered E-Series models have a single 8-gallon tank with one fill location.
ON-BOARD DIAGNOSTICS: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
FEWER GREASE POINTS: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
ULTRACUT SERIES 4 DECK: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
REAR DISCHARGE DECK: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.