Frame
Tractor - Welded, heavy-duty 1.5 x 3 x 3/16 in. tubular steel
Caster forks - 0.50 in. thick caster yoke arms
Tractor - Welded, heavy-duty 1.5 x 3 x 3/16 in. tubular steel
Caster forks - 0.50 in. thick caster yoke arms
Seat
Deluxe, two-tone, bolstered 4 in. travel suspension with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Deluxe, two-tone, bolstered 4 in. travel suspension with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Rollover Protection (ROPS)
2-post foldable standard with seat belt and latch
2-post foldable standard with seat belt and latch
Safety Features
Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
Drive Type
Drive description - Kanzaki KPS-18T Transmission, 16 qt. oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 ci Hydro-Gear HGM-18 motors, hydraulic oil cooler
Drive description - Kanzaki KPS-18T Transmission, 16 qt. oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 ci Hydro-Gear HGM-18 motors, hydraulic oil cooler
Transmission
Hydrostatic
Hydrostatic
Transmission Speed
Infinitely variable
Infinitely variable
Number of Speeds
Infinitely variable speed selection
Infinitely variable speed selection
Travel Speed Forward
0 - 12.5 mph (20 km/h)
0 - 12.5 mph (20 km/h)
Travel Speed Reverse
0 - 7 mph (11 km/h)
0 - 7 mph (11 km/h)
Drive Tires
26 x 12-12, 6 ply
Drive wheel release - Allows unit movement without engine running
26 x 12-12, 6 ply
Drive wheel release - Allows unit movement without engine running
Steering Tires
Front caster tires - 15 x 6.0-6, smooth-tread, semi-pneumatic
Front caster tires - 15 x 6.0-6, smooth-tread, semi-pneumatic
Parking Brake
Lever-actuated internal wet disc brake
Lever-actuated internal wet disc brake
Engine Make
Yanmar
Yanmar
Engine Model
3TNV88C, TNV Series
3TNV88C, TNV Series
Gross Horsepower
37 hp @ 3,000 rpm
37 hp @ 3,000 rpm
Displacement
1,642 cc
1,642 cc
Fuel System
Common Rail Diesel
Common Rail Diesel
Air Cleaner
Air filter - Heavy-duty canister air filtration system with electronic vacuum sensor
Air filter - Heavy-duty canister air filtration system with electronic vacuum sensor
Starter
Electric
Electric
Fuel Capacity
12 gal. (45.4 l) side fuel tanks
12 gal. (45.4 l) side fuel tanks
Length
97.2 in. (246.9 cm)
97.2 in. (246.9 cm)
Width
101.2 in. (257.0cm), 72.5 in. @ 3 in. HOC when folded
101.2 in. (257.0cm), 72.5 in. @ 3 in. HOC when folded
Height
71.8 in. (182.4 cm)
71.8 in. (182.4 cm)
Weight
Curb - 2,650 lb.
Curb - 2,650 lb.
Mowing Width
96 in.
96 in.
Mowing Height Range
1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments
1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments
Steering
Control - Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness
Control - Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness
Deck Construction
7 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. high strength alloy side skirt
Deck style - Floating deck
Deck style description - Full-floating UltraCut Rear Discharge Deck
7 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. high strength alloy side skirt
Deck style - Floating deck
Deck style description - Full-floating UltraCut Rear Discharge Deck
Deck Lift
Hydraulic
Hydraulic
Discharge
Rear standard with finish cut baffles included
Rear standard with finish cut baffles included
Spindles
Blade - No maintenance, sealed and non-greasable spindles, 7.75 in. diameter cutter housing with 0.98 in. (25 mm) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver
Blade - No maintenance, sealed and non-greasable spindles, 7.75 in. diameter cutter housing with 0.98 in. (25 mm) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver
Blades
4 at 24.50 in. length
4 at 24.50 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm
Power Take-Off (PTO)
Engagement - Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Engagement - Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft