Compare Models: 2025 Exmark Lazer Z X-Series 60 in. Kawasaki FX921V 31 hp (LZX921GKA606Q1) vs 2025 Exmark Lazer Z X-Series 60 in. Kawasaki FX921V 31 hp (LZX921GKA606Q1) at Otsego Outdoor Power

2025 Exmark Lazer Z X-Series 60 in. Kawasaki FX921V 31 hp (LZX921GKA606Q1) in Gaylord, Michigan — 2025 Exmark Lazer Z X-Series 60 in. Kawasaki FX921V 31 hp (LZX921GKA606Q1)

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2025

Model

Lazer Z X-Series 60 in. Kawasaki FX921V 31 hp (LZX921GKA606Q1)

Model Code

LZX921GKA606Q1

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster forks - 0.50 in. thick caster yoke arms

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster forks - 0.50 in. thick caster yoke arms

Seat

Deluxe, two-tone, bolstered suspension with elastomeric vibration control material. Mounted on innovative seat isolation system that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up

Rollover Protection (ROPS)

2-post foldable standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Drive System

Hydro

Drive Type

Drive description - Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7 qt. integrated reservoir, spin-on filter and heavy-duty components, 16 cc pumps and 17.1 ci motors

Transmission Speed

Infinitely variable

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 11.5 mph (18.5 km/h)

Travel Speed Reverse

0 - 7.0 mph (11.3 km/h)

Drive Tires

24 x 12.0-12, 4-ply Turf Master®

Drive wheel release - Allows unit movement without engine running

24 x 12.0-12, 4-ply Turf Master®

Drive wheel release - Allows unit movement without engine running

Steering Tires

Front caster tires - 13 x 6.5-6 smooth tread, semi-pneumatic tires

Parking Brake

Lever-actuated disc brake

Electrical

Battery

12V with 15A alternator

Instrumentation

Fuel indicator - Electronic sender

Hour Meter

Engine

Engine Make

Kawasaki

Engine Model

FX921V, V-Twin Series

Horsepower

31 hp @ 3,750 rpm engine speed

Displacement

999 cc

Air Cleaner

Air filter - Heavy-duty canister air filtration system

Fuel Type

Gas carbureted

Fuel Capacity

12 gal. (45.4 l), single fuel tank with single fill location

Measurements

Length

83.1 in. (211.1 cm)

Width

72.8 in. (184.9 cm)

Height

70.5 in. (179.1 cm)

Weight

Curb - ~1,256 lb.

Mowing Width

60 in.

Mowing Height Range

1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments

Mowing Height Adjustments

Adjustable from operator’s seat

Operational

Steering

Control - Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions

Deck Construction

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 6 with heavy-duty spindle

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 6 with heavy-duty spindle

Deck Lift

Standard, foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system

Discharge

Side standard with the option to bag or mulch

Spindles

Blade - No maintenance, sealed and non-greasable, 7.75 in. diameter cutter housing with 1.18 in. (30 mm) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver

Blades

3 at 20.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop electromagnetic 250 ft. lb. clutch with spot brake

Other

Includes

Cup holder

Features

ULTRACUT SERIES 6 DECK: Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)
VANGUARD OIL GUARD SYSTEM: With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.
ADAPT YOUR CUT: Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
EASY TO SERVICE: The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.
MAXIMUM PRODUCTIVITY: With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.
SUPERIOR OPERATOR COMFORT: Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.

Features

ULTRACUT SERIES 6 DECK: Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)
VANGUARD OIL GUARD SYSTEM: With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.
ADAPT YOUR CUT: Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
EASY TO SERVICE: The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.
MAXIMUM PRODUCTIVITY: With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.
SUPERIOR OPERATOR COMFORT: Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.